Spectra @ engine electrical systems

Salam Spectrans, Just nak info about our part of Spectra electrical system that supply entire current from our ignition coil assy  via our starter (1840) via plug cord cable assy (3) thru our spark plugs (2) into the cylinder head block.
Another things the correct current path setting configuration should be in corect sequence on where the plug cable cord should be planted it via ignition coil  bolt and plug cord, as showm on figure no (3).

As our Black cable plug cord wwhich diameter  only 6mm (black) will always face by spectrans :-
1. Leaking current via its rubber pvc jacket crack, due to extreme heat
2. Crack in the internal cords (carbon) that results car jerks, shivering while accelerations as ure on 3 cylinder instead of 4 cylinder. This is because the current supply or flow is insufficient to glow our spark plug in consistence manner...hence u will notice car like no power and jerking when pedal the gas.

Dear Spectrans, This is the solutions on how to overcome plug cords leaking current as Photo shown above is " #3 pin Core each cable ,10.2mm double layer silicone jacket (red) high temp ,performance plug cable cords specially made for KIA SPECTRA.

Its superb and high voltage current flows which tremendously ignites our Spark Plug ** to have a clean full combustion that leads no carbon deposited in the long run..Result engine is clean.
I had used this plugs cords for years and its proven lasting and trouble free. Instant feedback will occurs as:-
1. U will feel the RPM moves faster and consistence.
2. As u pedal the gas ,get instant power and pick up accelerations.
3.For long distance drive u managed to get good fuel consumptions due to gd lean combustions.
Really advice members to  used it and for those spectrans had try it will say its superb!!!. can reach me for more details and delivery at 013-7849798 or 017-7200466. Its simple and its D.I.Y. as illustrates in the diagram above.

Further more I will intro these superb ,high performance Spark Plugs (no.3) which is compatible with the 10.2mm plug cable cord. It can last up to 50k km( 2-3 yrs) of usage as the electrodes is made from 0.4mm IRIDIUM.
Normal plugs is main made from copper which will easily worn out due to weak conductor of heat, followed by Platinum plugs electrodes. the sequence is like :-

1.Copper - 2. Platinum 3- IRIDIUM 4- SILVER.......electrodes.
Pls be aware theres are immitation plugs, recycle plugs lots in our market. Go for Ori Japan Denso Iridium plugs only. Need more detail and ordered can contact 013-7849798.
wasalam